DT-Snap LT Cable Management Clamp with silver finish for F31, F32, F33, F34 and F44P truss 4-PAK
List Price: $30.95
Your Price: $25.00
Quantity:
Contact Us
Free Shipping Available Pak N Save

view more images

DT-SNAP/LT 4-PAK

Cable Management Clamp with silver finish for F31, F32, F33, F34 and F44P truss

OVERVIEW:

Because of its ease of use, DT-Snap LT saves time during set-up and dismantling. Cables can be laid significantly faster due to simple handling, which can be accomplished with one hand. Also eliminates the need to remove old adhesive residues from your materials. Use of the reusable DT-Snap LT not only reduces your ongoing costs for adhesive tape, cable ties, etc. but also protects your materials by eliminating the rough tearing off of electrical tape attachments. The clamp is compatible with all trusses and scaffolding having chord tubes measuring 48 mm to 51 mm. Mounting is also possible in otherwise unused brace areas.

Cable routing
· Holds cables up to a total cross-section of approximately 950 mm²
· Cable clamp, lockable with one hand
· Easy installation and removal of wires via locking hook on one side (possible with one hand)
· Holds down individual cables directly on the chord tube
· Possible to straighten cables by pulling them taut – axial resistance provided by a rubber band

Abrasion protection
· Divided clamp to hold suspension elements/wire cables with a diameter of up to 10 mm
· Non-slip abrasion protection between truss and suspension element
· No damage to DT-Snap LT, due to protected space in the locking area

FEATURES/SPECIFICATIONS:

  • Cable Management Clamp with silver finish (Pack of 4)
  • Fits F31, F32, F33, F34 and F44P Aluminum Trussing
  • Minimum Tube Size 48mm
  • Maximum Tube Size 51mm
  • Material Plastic (polyamide)
  • Profile Width 40mm
  • Weight – 0.05 Lbs. (Each)
  • Ships From: CA stock
    Average Delivery Time: 3-5 business days**
    (** in stock product, from date of order, standard ground shipping, delivery within the lower 48 US states)

How to attach JR-Clamp PLN to Trussing, Tube or Pipe

1. Release the wing nut by turning it counterclockwise to release bolt and open the collar.
2. Place the JR-Clamp PLN on the Truss, Tube or Pipe and close the collar.
3. Put the bolt back in place with the washer and wing nut above the collar.
4. Make sure the JR-Clamp PLN is located in its proper place on the Truss, Tube or Pipe before tightening the wing nut.
5. Turn the wing nut clockwise to tighten and secure the JR-Clamp PLN into place.

 


PRODUCT DETAIL
Sku: DTSNAPLT-4pak
Brand: Global Truss America