The Strobe Runner Strobe Controller - easy to operate and versatile enough for the most complex Diversitronics strobe systems!

OVERVIEW & INFO YOU MAY FIND HELPFUL:

• Strobe Runner has a number of preprogrammed sequences. For example, you can hook up 10 strobes, and run a program that fires them all in sequence. A slider on the console lets you control the speed of the sequence: fast, slow, and anything in between. So you can pick how fast it fires all the 10 strobes in a row.
  
• What causes a sequence to run? You can press the Bump switch, which runs through the sequence once and then stops. You can hook up an external switch, which runs through the sequence once and then stops. [Actually, if you keep holding down the Bump switch or external switch, it repeats the sequence for as long as you have the switch closed. When you let the switch go, it runs to the end of the sequence and then stops. But for practical purposes, a brief activation of the switches causes a single run through the sequence.] You can also operate Strobe Runner via a DMX signal fed into the box. Finally, you can press the Run button, which locks Strobe Runner on, running through the sequence again and again.
• So, where does the audio input fit in? The audio input is amplified, volume-controlled, and turned into a trigger pulse. Every time the sound hits a loud note, a little red light flashes. This flash is used to step through the individual steps of a sequence. With 10 strobes in a row, and SR set to a linear sequence, every time, the music thumps, the next strobe fires.

Controls;

• Runs 2-126 Strobes through DMX Lines 
• Intensity slide control
• Speed slide control 
• Audio Gain slide control 
• Includes a special program that simulates "lightning"

Selectable;

• Number of Strobes (2-126) 
• Programs (7) Select from Chase, Auto Reverse, All On, Alternate, Merge, Whirl & Explode
• Effects (11) Including Hyperflash,Rapidfire, Emergency Vehicle, Crossfade, ArcWeld, Fadeout,Variable Lightning, Fixed Lightning, Solid light ,Burst, and Flash
• Programs can be bumped (one sequence) or locked (repeat sequence) from front panel pushbuttons or an external switch through jack at rear of unit 

Models available; (if ordering online please indicate which model strobes you are using, if the order does not include the strobes - place this info in the Notes section of your online order form)

• Strobe Runner for use with 1500-DMX, 3000-DMX, 5000-DMX, ESM-DMX, SCM-DMX has original 7 Effects
• Strobe Runner II for use with Mark II-DMX, and DK-2000- DMX has additional Effects totaling 11
• Shipping Weight; 8 lbs